Waterproof LED Strip, Perfect Lighting for Kitchens and Bathrooms

Waterproof LED Strip (LED) has a special plastic coating, which is called the cover with an IP rating. This coating prevents the penetration of moisture into the internal components of LED tapes. Protection level is according to standard IP ranges from non- protection to full protection. 

LED ribbon perfectly used in kitchens, bathrooms, or outside the building. And in other places Waterproof strip lights are not effective. IP65 protection degree is the standard for waterproof tape, which is coated with silicone gel. The lamp or lamp IP65 can withstand the impact of partial water, including spray, stream and condensation. Therefore, this type of lighting fixture / the lamp is good to use in the kitchen and bathroom, where there are limitations in the use of lighting because of the threat of water ingress. Just the 12V waterproof LED strip lights are recommended to use at the edges of the windows, which in the winter time often appears condensate. Immersion in water not recommended because still water can seep in and damage the lamp components.

When choosing waterproof LED strip, it is necessary to pay attention to the peripherals. Traditional sources of power and, if colored LED strip, control devices and amplifiers are not permeable. If possible, they should be kept protected from moisture, but if this is not possible, that is, the version with the IP assessment for this purpose. Never immerse these devices! 

For other purposes, the common LED tapes are well suited. However, it should be noted that the IP reviewed coating not only protects from moisture, but also lengthen the time of use of physical contact and damage. This is important when using LED tape or LED tape light accessories on the floor, such as a stair edging edges. 

Always consult a qualified electrician, as the ratio of water and electricity is very dangerous. Despite the fact that the LED Strip using low voltage DC power, water can still close and damage some components.