Types of Pendant Lighting

Pendant lights continue to be widely used in modern construction, despite the onslaught of small embedded devices. Suspended ceiling lights, thanks to advanced technologies have received a new impetus to the development due to the high artistic component. They are not only subject to a functional purpose, but also an important decorative addition.

New materials and advanced design and manufacturing technology have greatly diversified and raise the artistic level, to improve the practicality and safety. There are few designers who will miss the opportunity to give the room the solemnity by such visually catchy subject like a chandelier. Now such a great choice, it is always possible choose a pattern that fits perfectly into the overall design, with absolutely no modification. And they often come with the SES lamp holder.

Modern technologies allow to getting the best approximation. No comparative assessment to distinguish them quite difficult, so do not always have a justifiable sense to go to considerable expense. Each type of luminaire has its advantages, and the choice depends on your preferences, technical and material possibilities. Decorative Ceiling Luminaires mainly exclusive, they perform the role of art in the main, when turned on and when off.  They are connected with the screw bayonet adapter.

This is clearly seen in the video public celebrations. Even included are pretty rare to emphasize the special solemnity of the event. For permanent lighting in halls additionally installed conventional ceiling lights hanging, lamps wall or others. Of course, and in the room, decorate it with the natural desire, the easiest way to hang a beautiful chandelier, but then you can lose the functionality of the room. Not a very pleasant stay in a beautiful room, if it is constantly balking at the light. Therefore it is necessary to seek a compromise.

Plafonds take up little space, so it is convenient to hang in rooms with low ceilings that require diffuse backlighting. Select pendant ceiling light is best for photos or to professionals. They will be able to choose the best fit based on the expressed wishes.

Lampholder with Switch for Private Homes and Outdoor Lighting

According to their functional purpose, screw bulb holder is a special element, using which the fixation light source within the device connected to the network. Any repair work related to the installation of electrical equipment, require that we perform calculations of performance wiring in the room. These activities are often directly related to the owner's wishes with respect to the design, take into account and design projects. So, to create an original design for your home may require different types of lighting fixtures, which will inevitably entail the need for mounting a variety of ammunition. Therefore it is necessary to understand how to connect to the bulb holder correctly, that is in compliance with all safety regulations.

When working with electricity is very important not to forget about the clearly defined rules that can not only ensure the normal operation of equipment, but also to preserve the health of property owners.

It is no secret that the cartridge for light bulbs may have any configuration, so that there is a separation of this element in the 4 broad lampholder with switch.

1. Threaded chuck has a diameter of 27 mm. Most often are used in the model apartments and private homes, since such a sample is equipped with a conventional socket and is suitable for 240V E27 LED bulbs.
2. 14 Mm threaded socket. It is used in this type of devices equipped with small-sized light bulbs. This coverage is typically zoned, that is not common, since the range of such products is not large.
3. Cartridge with a diameter of 40 mm. Key lamp for such samples is large model with high power (500W or more). Scope of such equipment is outdoor lighting (streets and roads).
4. A special type called bayonet is resistant to even the strongest vibrations. Such elements are often used for transport, in addition, other samples are threaded characterized in that it is not screwed on a standard basis, and inserted as in connection with heavy loads and vibration elementary standard cartridge may fall.

The Use of LEDs in the Floodlights

Before electric lighting, spotlights used exclusively seamen to search for enemy ships. Now the functional use of these devices has increased significantly. Over time, the lamp design has changed significantly: sunk into oblivion primitive incandescent bulbs, they were replaced by powerful and efficient LED Floodlight.

Each 10W LED floodlight is a separate, independent unit, designed for specific requirements and has unique characteristics. The distinctive feature of LED lamps is a long life - up to 50 000 hours of continuous operation, low temperature operating conditions. In contrast to incandescent lamps and other counterparts, LEDs virtually no heat, thus they are more fireproof.

As energy costs, LED light sources are comparable with saving bulbs on the basis of mercury, but at a light intensity. During the operation, they can be subjected to mechanical stress - they are often transferred to different places, touched, moved; LED lamps with have a high impact resistance without affecting the service life. Design feature of LED lamps is that the semiconductor emitter in one direction - toward the light.

Easy to use, low cost of ownership, high fire safety - this business card modern waterproof LED floodlight. Manufacturers offer LED lamps for virtually all types of feed caps, LEDs can therefore be used even on devices designed for other lamps - enough to choose the right foundation. The negative side of the LED light sources can be attributed to the high sensitivity of the frequency switching cycles off. Preferably used LED lamp, both in terms of cost savings as well as from the point of view of safety.

How to Unscrew the Bulb Socket

Regular replacement of burnt-out light bulb can become a serious problem if the bulbs are broken or come off, and the base at the same time remains in the cartridge. Remove the 220V lamp socket in several ways, but you must be sure to comply with the safety rules, not to get an electric shock.

Before starting work, switch off the electricity in the house or at least turn off the lamp. In this case, be very careful and to use only tools with wooden or plastic handles, as on the cartridge could survive phase, and by grounding the luminaire you an electric shock. Bare wires, if they are, check the indicator.

If shutting the lamp is not unscrewed from the cartridge (e.g. base burnt to the contacts of the cartridge), break the glass 60W E27 light bulbs. For safety, put on her plastic bag and hit with a hammer - all the pieces will be inside the package.

Try to unscrew the lamp base with the help of scissors. Thread the ends of the scissors inside the cap, and open with a force that they clung to the ribbed surface. Hold them in this position, and scroll counterclockwise, try to unscrew the cap. Try to divide the cartridge apart. If it is collapsible, simply unscrew the top part - out of it will be a very easy to unscrew the lamp base.

Take the pliers and gloves and hold them a glass column coming out of the cap, after wrapping it with a cloth. Carefully unscrew the lamp start, this column quite firmly connected with base, the main thing - do not break it.

If possible turn off the electricity in the whole house you do not, try another way. Take a plastic bottle and unscrew the plug, then heat the neck edge over the stove or on a lighter so that it became soft (hand touch is not necessary to try to determine at a glance). Insert the neck of the bulb into the socket and wait 10-15 seconds to cool down the plastic. Then quietly remove the cap.

How to Install the Pendant Lamp

Steps

1. Attach the power cord. Locate the assistant, who will keep the lamp on the ceiling until you connect the wire from the unit to the wires from the junction box. The connection is made according to the instructions for the luminaire. Usually, the white wire is connected to the white and black - with a black cord. Twist the bare ends of the wires. If the bare ends of the wires are too short, you can clean them with a special tool. Screw wire nuts / connectors to close the exposed connections and securely fix them. If they are not supplied with a lamp, get these connectors at any hardware store.
2. Perform grounding. Locate the fixture ground wire. Depending on the wiring harness, you secure it to the ground screw in the terminal box or attach a speaker to the ground wire. The ground wire is usually represented by a green wire or bare copper wire. If you have a ground screw tighten it to secure the wire.
3. Attach the wires. Push or Fold wires into junction box, making sure that they are all bonded wire nuts.
4. Install the mounting bracket and / or screws. Your new lamp must have the complete bracket and / or the fixing screws to secure the fixture to the junction box. The appearance depends on your lamp design. Follow the manufacturer's instructions.
5. Hang the fixture. Attach the dome or the lamp base to the screws or bracket. [14] This process will also depend on the design of the lamp, so first of all it is recommended to read the instructions on the packaging. In some cases, the problem involves assigning fixing screws with small holes in the lamp housing and turning it a quarter turn. In other cases, the need to secure the lamp screws to the mounting bracket.
6. Screw the ST 64 Edison bulb. Screw in the light bulb suitable power and size.
7. Turn the power on the machine. Now, your lamp is to be switched on. If the lamp does not work, turn off the electricity again and check the wiring.
8. Complete the installation. Install all the remaining elements of the lamp (circle, cover, cover), and adjust the height.

Advice

For optimal lighting, the rubber pendant lights must be placed at a height of 150-165 cm above the floor level or 75 cm above the table surface. Do not install the lights in places where they will interfere with the passage. The height of the luminaire models most regulated. If you are installing a hanging lamp in a place where previously there was no lighting or if you are installing several small lamps in place of one, you will need to perform additional wiring harness. If you do not have the appropriate experience, consult an electrician, since this task is much more difficult easy lamp installation.

What Preparations Should You Make Before Installing a Pendant Lamp?

Pendant lights will help change the look of the room and add comfort. They come in various shapes and sizes, allowing you to choose the model according to your preferences. Replacing an old chandelier in the hanging lamp is the main objective of the arrangement of the house, with which even a novice can handle it. Changing the lighting can change the atmosphere of the room for a few minutes.

Preparations

1. Get the rubber lamp holder and E27 light globe from online stores or local shops.
2. Extract the lamp. Carefully lay out the items within reach.
3. Turn off the electricity. Locate the opening machine or a switch box and turn off the electricity in the room or the house, where you will install the lamp. Failure to do so before the work can entail risk of electric shock.
4. Remove the old lamp. If you do not set light to a new or renovated building, you will need to first remove the old chandelier. Disconnect the lamp. The procedure will depend on the kind of chandeliers. If possible, ask someone to hold the chandelier until you remove it from the ceiling, it will not drop. Disconnect the old connection. These are small plastic caps, overlapping the wiring from the lamp and internal wiring. Usually it is sufficient simply to bend counterclockwise to disengage. Before disconnecting the wires will not interfere to check the absence of voltage with a tester. Finally, disconnect the wires and remove all of the remaining elements of the old lamp, which is still attached to the ceiling.
5. Check the ceiling. The location should be structurally sound. The junction box must be attached to the lamp beam or other support, and not just screwed screws in drywall. Not enough light is securely attached may just fall. Among other things, this is a direct violation of building codes. In the absence of adequate support for fixing the luminaire do not follow these steps to install.
6. Check the junction box. Make sure that all screws are in place and securely fastened. If necessary, tighten the screws, but do not use excessive force.

Banggood or Whether to Buy Lamps in the Shops?

Today, more and more popular energy-saving technologies are gaining. One of the latest discoveries was the use of LEDs for industrial and home lighting. Statistics show that the demand for LED lamps is growing exponentially. There is only one fat minus in the implementation of such innovations - the price.

The cost of any more or less powerful LED lights in the supermarket is much expensive. The price for the equivalent lamp 100W Edison light bulbs is even more high. When it comes to lighting the greenhouses, the energy-efficient lighting will result in more money. Naturally, the return on a little something in the next 2-3 years, which is waiting for the ordinary consumer LED products.

How all the same to implement LED lighting and not to overpay? The best option is to purchase LED products in online stores. Let's look at the example of a standard e-shop, Banggood, LED product for better comparison with a standard electrical supermarket. You can note that the price is much lower in the online store. The difference is up to 70%. There is nothing surprising in this. Online stores save huge amounts of money on the lease of commercial premises and salaries to employees.

Of course, the range of LED technology is much wider in the online store. Here there is a recessed lighting, and LED strip and LED panel lights, and even a night light with a motion sensor. Often the usual sellers are not profitable to take several samples of each type of lamp to the shop. Purchases are made in bulk and only of the range, which will certainly be in demand. Online stores offer a wider choice to its consumers. Purchases from the manufacturer of LED lamps (e.g. 240V LED lamp) are manufactured in bulk, but the region of sales is much broader than that of a conventional store.

Waterproof Lighting for Fountains and Pools

How many types of swimming pools to date, and there is as much illumination and lighting options available to them. In general, the role played by the lighting for pools - decorative and lighting for pools makes it convenient to stay in them even in the dark. Modern areas where there are swimming pools, each unique in its own way.

The lighting for pools gives a unique way of not only the pool, but the entire area. If you use different lights or lamps for swimming pools for swimming pools, you can change each time the backlight or lighting. There are still floating lamps for swimming pools - they create a dynamic sense, every time a new, unlike the previous one, as well as underwater lighting. Floating lights require regular charging, but their life is enough to create a great effect in the evening or at night. Underwater lights for pools operate on a voltage of 12 - 24 volts, which is not dangerous and economically. They are placed on the walls of the pool or on the bottom. They can add amazing light effects. For the pool also uses standard lights or lights with incandescent filaments.

Currently, the most popular and is more practical small waterproof LED lights for swimming pools. It is virtually a revolutionary solution in lighting technology. The LEDs have a long life, a varied palette of colors and shades with which designers achieve stunning effects at relatively high financial costs, the latter is more than compensated by lifetime. BTW, you can select the submersible LED lights at Banggood. Besides, you can easily get other LED lights (e.g. IP65 floodlight) there with high quality and reasonable prices.

Waterproof LED Strip, Perfect Lighting for Kitchens and Bathrooms

Waterproof LED Strip (LED) has a special plastic coating, which is called the cover with an IP rating. This coating prevents the penetration of moisture into the internal components of LED tapes. Protection level is according to standard IP ranges from non- protection to full protection. 

LED ribbon perfectly used in kitchens, bathrooms, or outside the building. And in other places Waterproof strip lights are not effective. IP65 protection degree is the standard for waterproof tape, which is coated with silicone gel. The lamp or lamp IP65 can withstand the impact of partial water, including spray, stream and condensation. Therefore, this type of lighting fixture / the lamp is good to use in the kitchen and bathroom, where there are limitations in the use of lighting because of the threat of water ingress. Just the 12V waterproof LED strip lights are recommended to use at the edges of the windows, which in the winter time often appears condensate. Immersion in water not recommended because still water can seep in and damage the lamp components.

When choosing waterproof LED strip, it is necessary to pay attention to the peripherals. Traditional sources of power and, if colored LED strip, control devices and amplifiers are not permeable. If possible, they should be kept protected from moisture, but if this is not possible, that is, the version with the IP assessment for this purpose. Never immerse these devices! 

For other purposes, the common LED tapes are well suited. However, it should be noted that the IP reviewed coating not only protects from moisture, but also lengthen the time of use of physical contact and damage. This is important when using LED tape or LED tape light accessories on the floor, such as a stair edging edges. 

Always consult a qualified electrician, as the ratio of water and electricity is very dangerous. Despite the fact that the LED Strip using low voltage DC power, water can still close and damage some components.

How to Disassemble the Laser Pointer

It is believed that conventional inexpensive laser pointer, sold at newsstands, a folding design. However, using special techniques, it lends itself to dismantling with no damage.

Change clothes in clothes and shoes are not able to accumulate an electrostatic charge. Then briefly touch a radiator. This way you will prevent damage to the laser diode by static electricity. Remove the cover from the pointer, a green laser 301 or laser 303, and pull out the battery. Combine them so that they do not touch each other. Remove from the housing of the device insulating cylinder of the film. Save it. Remove the nozzle from the pointer and set it aside.

Wrap the unit in several layers of fabric. Gently, so as not to deform the body, hold the wrapped pointer in a vise screw up. Screw the nut on the thread. Then, using plier, keep it dimmed. Keep pliers and nut straight, avoiding skews. Gradually exits the emitter housing and remains on the nut.

Remove the nut from the emitter. Now you can close button (but not the resistor!) and submit to the emitter voltage of about 4 from the three series-connected large batteries AA or AAA size via an additional resistor of about 100 ohms nominal value and a large, easy switch. Pre-parallel to the laser diode, connect a capacitor of about 0.01 mkF. Measure the current through the pointer. It should not exceed 35 mA. If necessary, adjust the resistor value. Connecting and disconnecting the milliammeter or an equivalent instrument is combined with the power disconnected. Keep in mind also the need to protect the laser from static electricity. If the laser diode is a chip, is shown at the emitter with extreme care so as not to brush it off.