How to Select the RGB-LED Controller for Multi-color Ribbon

Just imagine - you can change the lighting in any room in your home to suit your mood. I wanted something unusual and mysterious - turn muted green, want peace, tranquility - you can turn a deep blue color. Control light will help controller for multicolor ribbons. Simply install the RGB strip and connect it to the RGB Controller.

No matter how many RGB-LEDs in 1 meter of your LED ribbons - 30 or 60. They are controlled by the same controller. In addition to the appearance of the (to him we turn below), each RGB-controller has the following specifications: operating voltage (typically 12V or 24V) and maximum power (typically 72W, 108W, 144W or 288W). BTW, you can select the RGB Controller at Banggood. Besides, you can easily get other lighting accessories (e.g. LED adapter) there with high quality and reasonable prices.

The first step is to determine the type of controller:

1. Controller without remote control
2. Controller with infrared remote control (abbreviated as IR)
3. Controller with remote radio control (in short, IR)
4. The controller, which uses the WI-FI channel

You can also find the controller without the remote control, which outwardly resembles the switch during installation. To this you can go on and off when it is convenient. For example, is such a panel with buttons or is such a built in touchpad. These controllers are controlled via an infrared remote control and operate in line of sight IR receiver controller at a distance of up to 10 m. Ie It works as a TV remote - referred and, from the other room control do not work.

WiFi LED controller can have any kind of remote control (button or touch). In addition they can be remote controlled via mobile phone. They are significantly more expensive than other controllers. Software for Android and iOS for the management of such controllers is usually attached to the disc, or is freely available on the Internet.