Installations of LED Strips

LED-strip includes LEDs arranged in a specific sequence in a flexible manner in width from 8 to 20 mm. The thickness of the tape, rated at 12 V, does not exceed 3 mm, and the skein length is usually 5 meters. The high flexibility of the base, its small thickness and adhesive pieces on the back of significantly facilitate installation of LED strip (e.g. 3528 SMD LED Strip Light). The price of this construction depends on several parameters:

l  Type of LEDs and their level of brightness (light-emitting crystal 1-3).

l  The distance between the LEDs on the tape (30-120 bulbs per meter).

l  The width of the base and the number of rows, which are located along the light-emitting diodes. The number of highlight colors is available after connection.

l  The degree of protection against moisture (the presence of a silicone sheath or covering).

Before heading to the store for tools and materials to highlight the Organization should be to calculate how many tapes you need to buy, how much power should be in the power supply and whether the controller is needed or not.

The surface of the walls, ceiling, furniture and countertops, which will be performed the installation of LED tape must be clean and free of grease. Fix the tape should be such that it is able to fully perform their functions. The angle of the LEDs reaches 120 degrees, so it is enough to identify the approximate location of fastening. However, under the mistaken placement will be illuminated deep niches or ceiling projection, not a room. In accordance with the recommendations of experts directly mounting tapes LED should start after the assembly of the whole chain on the table or on the floor and check its performance. When installing the system, it must be disconnected from the network. Unlike E27 Vintage Edison Bulbs, by installation of LED strip with your hands, you should avoid too sharp bends), as they may damage the tape. LED design includes an anode and a cathode, so the master in charge of the installation should pay attention to the correct polarity. LED strip, set by the rules is capable of providing long-term and high-quality lighting.