How to Choose LED Bulb?

LED bulb, is the daily necessities for every house. With a plastic lamp socket, the bulb can be stick on the wall. After we charge, the bulb light can bright the whole room. But if we buy some poor quality bulb, maybe this bulb will be the potential safety hazard. But do you know there are many items that we should keep in mind when choosing cheap led gu10 bulbs. Today this article will give you the best suggestion to tell you how do we choose the perfect LED bulb.

·Look at packaging and trademark
In general, high-quality products, trademark printing quality, font clarity, not easy to fall off, wipe with a soft damp cloth, signs clearly visible, easy to wipe, manufacturers of trademarks and related certification mark. Fake and shoddy products, poor quality printing, fuzzy fonts, easy to erase, no manufacturer's trademark and related certification mark should be abandoned.

·Look at the LED tube appearance
The plastic shell of the lamp must choose the kind of engineering plastic flame retardant type. Ordinary plastic is easy to deform and flammable and this is prohibited for the production of energy-saving lamps. From the surface can be a simple distinction between the two, the latter surface is more smooth, shiny, the former surface similar to the frosted glass texture.

·Look at the work of the temperature
LED energy-saving lamps in the normal working condition, the temperature rise should be very low. Otherwise, LED energy saving lamp life is very short. At the same time, energy-saving lamps lit, there is a very fast flash, or very dazzling fluctuations, indicating that the quality of energy-saving lamps.

·The start performance
LED energy-saving lamps start with two features: First, the higher the temperature start the easier; Second, the lights off, not flash.

How to Choose Your House Light Bible?

Thanks to light, we can appreciate the beauty of night. Sometimes, I even can’t imagine how bad for a world to live in a dark environment. Every night, when we go upstairs, we need light to make the road bright to protect us from falling. So we can set up motion sensor led bulb to make sure the light can be provided. At the same time, money can be saved.  And in my view, light plays most important part in a house design too.


·In the balcony
If the balcony space is relatively large, you can set up a balcony above the balcony or pool. In addition to the installation of bright ceiling lamps or outdoor light-type wall lamp, you can also install a Blu-ray aquarium lamp in the pool, to help increase wealth.

·In the bedroom
Bedroom lights should be soft, bedside lights or ceiling embedded in the ceiling on a few small lamp can make the bedroom warm and comfortable. And children's room should be designed in unique shape and light to evoke the imagination of children.

·In the Kitchen
It is advisable to use cool white light, ceiling and embedded fixtures to fit in a bath or workbench to provide plenty of light and special lighting for wall or rail lights. Stick on light bulb maybe the perfect choice.

·In the bathroom
It is advisable to use ceiling lamps, downlights or embedded lamps, cool lights or warm lights according to the design style.40w incandescent bulb can be a solid pick.

How to choose your torch?

Flashlight are mainly subdivided into LED flashlight, LED rechargeable flashlight, LED mini flashlight, LED outdoor flashlight and LED flashlight and other flashlight.

At present, the common LED flashlight are small key ring type, penlight torches, cree xm-l t6, laser pointer aaa batteries, multi-lamp type, single lamp high power type. From the type of power point, there is an AA battery or an AAA battery, and some use three AAA batteries, and some use of three button batteries, as well as the use of manual power generation and so on.

Here are some tips for you to choose a suitable torch.

1.Look at which occasion you need to use, such as night riding, night fishing, outdoor camping, cave, patrol and so on.
2. Look at the battery, there are two kinds of ordinary batteries and lithium, although the lithium battery is rechargeable, but low life, about 2 years. LED life is about 10 years, according to the actual situation to choose.
3. Look at the bulb, light bulb out of the case, the naked eye is difficult to distinguish it from good or bad, you can see the light in the case of light consistency.
4. Look at the aperture, good LED flashlight aperture for a uniform circle, poor LED flashlight spot is divided into yellow and blue uneven distribution.
5. See the brightness, good LED flashlight have high brightness, slow decay.
6. To see waterproof, good LED flashlight with waterproof function, good seismic performance, that is resistant to fall.
7. look at the appearance. I chose the aluminum alloy shell, nice.
8. Select the brand, the brand is another definition of quality standards. Without a good quality, it can’t become a well-known brand, so in the choice of flashlight, you need to understand the brand flashlight. According to the degree of hand, you can choose different brands flashlight.

How to maintain the light?

Solar street light is a new type of energy products. It’s energy saving, environmental protection. And it does not need to pull the wire, buried cable, installed generator. Relying on the outside of the natural wind and the sun to generate electricity, this new product will be favored by the masses, then how to maintain the solar street lights is a problem?

Firstly, there is some need for you to keep clean every day to extend the life of solar panels
 Which is a part of the life of solar panels. Due to the decline in conversion rate, it can be appropriate to reduce the solar panel wattage, but also greatly saves the investment cost of the battery. Every day regularly check if there is dust and leaves and other shelters on the solar street panels. In the event of such a situation, please resolve it in time. Because only when you do like what I say can it ensure that the solar powered wall lights are able to absorb enough light and  keep the photoelectric Conversion rate not declined. Solar street light fixture internal parts connector to plug tight, plug firmly, to avoid loosing by wind and poor contact caused by failure. Solar street lamps and poles, light pole and cantilever reliable fixed. Lifting operations should strictly follow the operating procedures. In particular, pay attention to the lifting equipment around the power lines and other lines, as well as the surrounding structures. The lifting point should be reasonable, after positioning to adjust.

Also note that:
1, Usually clean with a clean feather duster gently brush off the dust. This process should be very careful.Especially pay attention to clean square led ceiling light. It is a little dangerous.
2, If it is non-metallic sun light, it can be wiped with a damp cloth. Please be careful not to wipe the power cord.
3, If it is metal lighting, a dry cloth can be wiped. Do not touch the water.
Pay attention to the installation of solar street light poles. Starting from the basic construction, the light bit to the main line to control the straight line, and reasonable according to the road design linear changes, poles straight, processing welds and repair mouth to avoid the main line direction, and the whole line to maintain consistency.
This is the solar street lights on the situation, we can pay attention to these points in the maintenance.

Find the eye protection table lamp for yourself

Room lighting has a huge impact on your ability to work. In the dim light, the eyes will be tired quickly and there comes a sleepy state and lethargy. Conversely, a very bright light irritates the mucous membrane of eyes, causing watering and discomfort. In order to distribute the correct and uniform light output, you need to take advantage of new technologies. The output of this situation would be the use of portable light source. We present our table lamp - BlitzWolf® BW-LT1S eye care LED lighting- a unique solution for those who work at the desk in the evenings or likes to read at bedtime. This course is essential not only in home use, but also for offices and agency.
  

The table lamp can be of three varieties-divided due to the application.

Classic table lamp-Many of the models are presented in the form of small animals, cartoon characters, flowers, butterflies, and other characters. The difference of brilliance and originality of design is able to attract the attention of the child and helps him develop his imagination. Office table lamps- this type lamp have a business, clean look and modern. The basic design consists of adjustable feet of the lamp. At the same time they are different uniform colors: gray, the color "metallic" or white. Workplace lighting plays a decisive role in the productivity of labor. Therefore, many employers are paying special attention to his subordinates’ good lighting.

Night light-This table lamp found application not only in the night duty at the various enterprises, but also for lighting at home.

Please note that different types of light bulbs used in lamps - this LED incandescent and "economy". Different lamps give a different light - from yellow (sunlight) to blue (daylight). This kind of BlitzWolf® BW-LT1 eye care led lighting can be adjusted to the light you want.

 

 When choosing a table lamp, make sure that it gives a sufficiently intense and uniform light. It is desirable that the lamp was adjusted in the direction and flow of light. Lamp mounting also plays an important role. If necessary, you can rotate in any direction, and adjust the height. When buying a table lamp, decide for what purpose you need it. Wide range of models, which offer modern manufacturers, will help you buy a lamp table. This object can become not only a decorative element, but also an essential functional part of the interior of your home, apartment or office.